₹140.00
| Technical Data | Standard Applied | |
|---|---|---|
| 1. Mixing Time | 45-60 Sec. | ISO 3107 |
| 2. Setting Time | 5 – 7 Min. | |
| 3. Compressive Strength | 10 – 20 MP |
Mix Powder and liquid in a ratio of 0.32 to 0.08 (1 scoop powder and 3-4 drop liquid) for about 45- 60 seconds to obtains putty consistency. Place the putty into the cavity and remove excess of the product immediately. Allow hardening for 11-12 minutes. Trim the restoration with a tungsten carbide bur.
Warning :
Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally. Contact with the skin may cause irritation, burns or hypersensitivity. If contact with skin occurs, immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs, discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.
Contraindications : It is contraindicated for use with patient who have a history of severe allergic reaction to any of the components.
Precautions : Zitemp is a Eugenol based composition and therefore it should not be used as a liner under resin based filling materials. Avoid contact with eyes. Do not invert the bottle upside down while opening to avoid excess dispensing of the powder and avoid excessive force while dispensing the liquid from the dropper.
Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life is not affected after opening if stored in a cool dry place.
Shelf Life : 3 years under proper storage.
Sridhar –
Zitemp truly lives up to its name as a quick-setting zinc oxide eugenol (ZOE) cement. The rapid setting time makes it ideal for busy dental practices, allowing for efficient patient turnover without compromising the quality of the restoration. This feature is particularly beneficial for temporary crowns and other short-term applications.
Umeer –
The application process for Zitemp is straightforward and user-friendly. The consistency is smooth and easy to mix, which facilitates precise placement. However, some practitioners may find that it requires a bit of practice to achieve the perfect ratio for optimal performance, but overall, it’s manageable.