Instruction for use :
- Apply Porcelain Etchant Gel (CeraEtch) to porcelain surface for 90 sec.
- Rinse with copious amounts of water for two minutes. Dry with air or dry with some drying agent like (UltraDry) to treated surface, followed by gentle air.
- Apply Silane-X Bond Enhancer and allow to dry naturally or with gentle flow of air for 1minute.
- Apply Renew Universal bonding agent to the treated area Light-cure for 20 seconds. Apply Fusion Flo opaque to mask the metal if necessary.
- Place composite and light-cure for 40 seconds
Warning : Read the instructions thoroughly before use of this product.
- Ceraetch contains Hydrofluoric acid which is a very powerful chemical and extreme care must be taken while handling this product.
- Silane-X contains flammable solvents. Keep away from ignition source
- Fusion Flo: Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally. Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician.
- Renew Universal contains certain methacrylates and other ingredients which may cause irritation or sensitivity in some individuals. If contact occurs with skin, immediately wash with soap and water. Improper use may result in allergic reaction or skin and tissue irritation. If this occurs, discontinue use of this product. Protective gloves and eye wear should be worn while handling this product. If contact occurs with eye. Flush immediately with large volumes of water and seek medical attention immediately. Do not expose materials to elevated temperatures or intense light.
Storage Condition : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep
away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf Life : 2-years from the date of manufacturing.
Disposal Conditions : To be disposed off based on the prevailing rules of the country in which it is used.
Rakesh –
The ACE Repair Kit is an all-in-one solution for chair-side ceramic repairs. It includes everything needed for quick and effective repairs, from bonding agents to polishing materials. This comprehensive approach ensures that dental professionals can address a variety of repair scenarios without needing multiple products.
Rajender –
The kit is designed with usability in mind. The instructions are clear and straightforward, making it accessible for both experienced and less experienced practitioners. The application process is relatively simple, although a bit of practice may be required to master the techniques for optimal results.
Rajpal –
One of the standout features of the ACE Repair Kit is its strong bonding capabilities. The materials provide excellent adhesion to ceramic surfaces, ensuring that repairs last. In my experience, restorations repaired with this kit have held up well under normal chewing forces, reducing the need for frequent rework.
Naresh –
This kit is a time-saver, allowing for quick repairs chair-side without compromising quality. The efficient process helps minimize chair time for patients, which is a significant advantage in busy practices.