- 5% Buffered Hydrofluoric acid in liquid form
- Improves the mechanical bond between porcelain and bonding agent
PACKAGING
- 1 x 10 ml Bottle, 1 x Instruction Manual.
Cera Etch Liquid
5% Hydrofluoric Acid Porcelain Etching Liquid
₹900.00
CE 0123
The product is audited & approved as per European standards and laws, and has a valid CE Certifications
MDSAP
MDSAP quality management system satisfies the regulatory jurisdictions requirements of MDSAP Countries
CDSCO
Registered & Approved as per MDR 2017 Guidelines by Central Drugs Standard Control Organization
INDICATIONS
- Repair of porcelain restorations.
- Cementation of porcelain restorations.
PRODUCT BENEFITS
- CeraEtch is 5% Buffered Hydrofluoric acid in liquid form.
- It improves the mechanical bond between porcelain and bonding agent by increasing the surface roughness.
PRODUCT DETAILS
- CeraEtch : 5% Hydrofluoric Acid.
Size1x10ml Bottle
2 reviews for Cera Etch Liquid
Direction for Use (for cementation of ceramic restoration) :
- Protective eye wear and gloves must be worn by the practitioner.
- Remove cap from the CeraEtch syringe and attach dispensing tip and check the etchant flow through the tip before applying. Apply etchant to the dry porcelain for 90 seconds.
- Rinse with a copious amount of water and air dry. The etched surface should dull and frosty.
- Apply 1– 2 thin coats of Silane-X with a brush tip applicator to the etched surface and allows to dry for 30 seconds.
- Apply Renew Universal / Total Etch Bonding adhesive and follow the instructions for bonding and restorative with composites or cements.
Direction for Use (for repair) :
- Protective eye wear must be worn by the practitioner and patient and protecting gloves must be worn by the practitioner.
- Isolate the area to be etched with a rubber dam. Apply gingival barrier around the area to be etched.
- Remove cap from the CeraEtch syringe and attach dispensing tip and check the etchant flow through the tip before applying intra orally. Apply etchant to the dry porcelain for 90 seconds. Suction the porcelain etchant and rinse with a copious amount of water and air dry. The etched surface should dull and frosty.
- Apply 1– 2 thin coats of Silane-X with a brush tip applicator to the etched surface and allows to dry for 30 seconds.
- Apply Renew Universal / Total Etch Bonding adhesive and follow the instructions for bonding and restorative with composites or cements.
Warning : Read the instructions thoroughly before use of this product. Hydrofluoric acid is a very powerful chemical and extreme care must be taken while handling this product.
Storage Condition : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf Life : 2-years from the date of manufacturing.
Sushil –
The liquid formulation allows for precise application, ensuring that only the intended areas are etched. The dropper design facilitates controlled dispensing, which is beneficial for avoiding excess application. However, practitioners must exercise caution to prevent unintentional contact with surrounding tissues.
Amandeep –
Cera Etch Liquid delivers exceptional results for porcelain etching. The 5% hydrofluoric acid concentration effectively prepares ceramic surfaces for bonding, significantly improving adhesion for various restorative materials. I’ve consistently seen strong bond strength when using this product, making it a reliable choice in my practice.