Fusion Bond DC

Instructions for Use :

Direct Restoration :

1. Clean the prepared root canal or cavity with water spray and then air dry.
2. In deep cavities / preparations, cover the dentine close to the pulp with hard setting calcium hydroxide liner (Cal LC ) or glass ionomer liner (I-Seal). 3. Apply Etching Gel (Actino Gel) to the Cavity surfaces starting at the enamel margins. Condition for 15 Seconds. 4. Rinse with vigorous water spray and dry the cavity surfaces completely by blowing gently with an air syringe. Do not desiccate dentine. Proceed immediately to apply Fusion Bond DC.

Mixing Directions : Dispense 1-2 drops of Fusion DC Bond Agent and equal numbers of Fusion Bond DC Activator into a clean dappen dish or mixing well. Replace cap promptly. Mix both the components for 3-4 sec. Apply using a disposable brush. Wet all the tooth surfaces uniformly. Gently evaporate solvent by thoroughly drying with clean, dry air for at least 5 sec. If required repeat application and air dry and light cures if desired. Cure for 20- 30 sec using a curing light.

Contraindications : Fusion Bond DC is contraindicated for use with patients who have a history of allergic reactions to methacrylate resins or any of its components.

Warnings :

1. Fusion Bond DC contains methacrylates which may be irritating to eyes. Before using this product wear protective glasses as well as cover the patients eyes to protect from splashing material.
2. Fusion Bond DC contains polymerizable monomers which can cause skin sensitization (allergic contact dermatitis) in susceptible individuals. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water after contact. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention.
3. Avoid contact with oral soft tissues. If accidental contact occurs, flush mucosa with plenty of water and expectorate water. If sensitization of mucosa persists, seek medical attention immediately. 4. Fusion Bond DC contains tbutanol. Do not breathe vapor.

Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Shelf Life : 2 years from date of manufacturing.