Directions For Use :
- BONDING PROCEDURE
Cavity Preparation : Prepare tooth using standard techniques. Make sure that the temporary material is thoroughly removed from the surface. Use rubber dam for protection. Rinse and dry the prepared tooth surfaces by gently blowing with an air syringe.
- TREATMENT OF TOOTH SURFACES
Select out of the following 3 technique options :
- a) Self-etch technique : Apply Renew Universal to bur-cut enamel and dentin, without a separate etching step. Note : Non bur-cut enamel should always be treated with a 35-40% phosphoric acid gel for 10 seconds, rinsed with water for 5 seconds and gently dry.
- b) Selective etching of enamel : Prior to applying Renew Universal to enamel and dentin, etch enamel only with 35-40% phosphoric acid gel for 10-15 seconds, rinse for 5 seconds and gently dry.
- c) Total-etch technique : Prior to applying Renew Universal to enamel and dentin, etch enamel and dentin with 35-40% phosphoric acid gel for 10-15 seconds, rinse for 5 seconds and gently dry.
- APPLICATION OF RENEW UNIVERSAL
- a) Bottle type : Prior to dispensing, shake the bottle of Renew Universal thoroughly. Dispense a few drops in to a clean dispensing dish. Replace bottle cap immediately.
- b) Syringe type : Dispense the bonding agent on to the applicator tip. Using the disposable applicator provided. IMMEDIATELY apply to all repaired surfaces using the disposable applicator.
- c) Leave undisturbed for 10 seconds after the end of application. Renew Universal can provide sufficient. bonding strength even when dried immediately after application without waiting time.
- d) Dry thoroughly for 5 seconds with oil free air under MAXIMUM air pressure. Use vacuum suction to prevent splatter of the adhesive. The final result should be a thin adhesive film with a glossy surface and which does not visibly move under further air pressure.
- LIGHT CURING : Light cure using a visible light curing unit for 20 seconds.
- PLACEMENT OF LIGHT-CURED COMPOSITES/COMPOMERS : After having light cured the adhesive, follow manufacturer’s instructions for use in order to place, contour and light-cure the composite resin material of choice.
- FINISHING : Adjust restoration, finish and polish using standard techniques.
TREATMENT OF HYPERSENSITIVE TEETH AND IMMEDIATE DENTIN SEALING
(I) APPLICATION RENEW UNIVERSAL : Refer to
- BONDING PROCEDURE,
- TREATMENT OF TOOTH SURFACES and
- APPLICATION OF RENEW UNIVERSAL.
Wait 10 seconds before drying. Note : For the treatment of hypersensitive teeth, the self etch technique
is recommended.
(II) LIGHT CURING : Refer to 4. LIGHT-CURING
(III) REMOVE UN POLYMERIZED LAYER : Remove the un polymerized layer of RENEW
UNIVERSAL using a moist cotton pellet.
Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life is not affected after opening if stores in a cool dry place.
Shelf Life : 2-years from the date of manufacturing.
Pratap –
I highly recommend Renew Universal from Prevest for anyone looking for a reliable bonding agent. This self-etch bond not only simplifies the bonding process but also delivers excellent results. Its compatibility with light-cure and dual-cure composites is a major advantage, allowing for flexibility in restoration choices.
Shabbir –
Renew Universal stands out as an efficient bonding agent for dental restorations. The single-component formula eliminates the need for multiple products, which saves time too. The compatibility with various composite materials is a major plus point.
Atul –
Renew Universal by Prevest is a game-changer in the world of dental bonding agents. With its innovative formula combining MDP and 4-META, it simplifies the bonding process for both direct and indirect restorations. The single-component design makes it incredibly easy to use, and I’ve noticed excellent adhesion to dentin and uncut enamel. Plus, it’s fully compatible with various light-cure and dual-cure composites, making it a versatile choice for any practice.
Pratap –
I recently tried Renew Universal from Prevest and was impressed by its performance. This self-etch bonding agent streamlines the workflow, as it combines etching, priming, and bonding all in one bottle. The bonding capabilities to dentine and enamel are outstanding, providing reliable results with every application. It’s great to have a product that works seamlessly with both direct and indirect restorations, and my patients have responded well to the durability of the bond.
VISHVAS –
Using Renew Universal has transformed my approach to bonding in dental procedures. The MDP and 4-META base provides a bond that I can trust for both direct and indirect restorations. I love that it combines etching, priming, and bonding in a single bottle, which reduces complexity and enhances efficiency. The adhesion to dentin and enamel is impressive, and I’ve noticed a marked improvement in the longevity of my restorations.